Harquil1908
|
| posted on 12/5/15 at 11:36 AM |
|
|
Wiring diagrams
To the collective.....
I recently purchased my savage switches for the car but I'm struggling or rather havnt got a clue how to wire my savage switches up so the
lights how they should for IVA and also the hazard/indicator wiring, well I'm at a complete loss.
Does anyone have any diagrams I could use to see how other peeps have wired them up.
|
|
|
|
|
loggyboy
|
| posted on 12/5/15 at 12:39 PM |
|
|
Snowy has a general guide, seems quite in depth but not used it myself (still have my wiring to do!)
http://www.locostbuilders.co.uk/viewthread.php?tid=169470
The savage switch wiring diagram is also uploaded on here:
Mistral Motorsport
|
|
|
Harquil1908
|
| posted on 12/5/15 at 05:44 PM |
|
|
Cool thanks for that. I will have a good read through that over dinner. It's more the wiring up the switches for the lights so there ok for IVA
|
|
|
snowy2
|
| posted on 14/5/15 at 02:12 PM |
|
|
I have on here somewhers a cct diagram for wiring savage switches...i will see if i can find them.
sometimes you are the pigeon, most of the time the statue.
|
|
|
snowy2
|
| posted on 14/5/15 at 02:36 PM |
|
|
The numbers refer to those on the savage switches themselves. ....
this is how to wire savage switches for the lighting cct...it uses 3 relays and is earth switched switches will illuminate when opperated.
[Edited on 14/5/15 by snowy2]
[Edited on 14/5/15 by snowy2]
sometimes you are the pigeon, most of the time the statue.
|
|
|
Harquil1908
|
| posted on 14/5/15 at 07:53 PM |
|
|
Cool thanks for that. My uncle who is helping me out says he understands which is good, means he can do it for me haha.
|
|
|
