lordbenny
|
| posted on 5/12/20 at 12:25 PM |
|
|
No spark...Zetec 1.7 SE
As title suggests...car was firing up perfectly then overnight it fired up but misfired, now it doesn’t fire up and I have no spark. Any ideas?
|
|
|
|
|
theconrodkid
|
| posted on 5/12/20 at 01:25 PM |
|
|
CPS sensor or a dodgy wiring conection i would go for 
who cares who wins
pass the pork pies
|
|
|
lordbenny
|
| posted on 5/12/20 at 01:28 PM |
|
|
quote:
Originally posted by theconrodkid
CPS sensor or a dodgy wiring conection i would go for
Not coil pack....as I was saying it was firing up but misfiring for a couple of starts but now nothing.
|
|
|
gremlin1234
|
| posted on 5/12/20 at 03:05 PM |
|
|
has it run out of fuel?
|
|
|
lordbenny
|
| posted on 5/12/20 at 03:19 PM |
|
|
quote:
Originally posted by gremlin1234
has it run out of fuel?
No spark!
|
|
|
johnH20
|
| posted on 5/12/20 at 03:48 PM |
|
|
Earths seem to be the root of most electrical problems. Its a pain I know but check everything relevant. If you are using standard immobiliser check
key orientation. Good luck.
|
|
|
Tatey
|
| posted on 5/12/20 at 07:56 PM |
|
|
I had a similar thing on my Haynes. I sent my carbs off for rebuild and when I got them back it wouldn't fire.
Turns out one of the crimped connectors providing power to the EDIS module had pulled out so I had no spark.
There is a check you can do with the coil pack wiring to confirm you are getting a spark signal. I'm not really sure what it is I'm
afraid.
|
|
|
gremlin1234
|
| posted on 5/12/20 at 09:09 PM |
|
|
quote:
Originally posted by lordbenny
quote:
Originally posted by gremlin1234
has it run out of fuel?
No spark!
yea but often people state 'no spark' when they mean not firing. and infinitely better then a new post saying
'A'
|
|
|
lordbenny
|
| posted on 9/12/20 at 01:19 PM |
|
|
So....I’m hoping that it’s the ECU fuse as fuel pump isn’t working either...Would you think this the culprit?
|
|
|
