Hellfire
|
| posted on 28/4/05 at 11:51 PM |
|
|
ZX12R Power Commander Connections
Sorry for all these questions 
We're putting a Power Commander into the loom on the engine. The Power Commander instructions ask for the large connectors to be connected in
series which I have done, it also asks for the small two wire connectors to be connected in series into a "white" connector under the seat
(on the bike)... we have no white connector.
Image deleted by owner
My question is: what is this white connector under the seat for? I'm assuming; as it simply takes a red (positive) from the inter-connection;
that it is merely a 12V ignition switched feed ie + feed for foot-peg.
Can anyone verify this for me as my questions to http://www.powercommander.com are being ignored.... which will go on the website as a negative!!!
Maybe they will answer if I threaten them with this? 
TIA
[Edited on 29-4-05 by Hellfire]
|
|
|
|
|
tks
|
| posted on 29/4/05 at 07:17 AM |
|
|
Dunno
if it helps,
but i have those ones on my Honda loom for the 2 most important sensors on the bike.
- Cam shaft position
- Crankshaft position....
TKS
The above comments are always meant to be from the above persons perspective.
|
|
|
marc n
|
| posted on 29/4/05 at 07:21 AM |
|
|
try giving holeshot in bradford a bell they must fit plenty of these
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
tadltd
|
| posted on 29/4/05 at 09:51 AM |
|
|
We've got a ZX12R bike in the workshop just now (minus engine!  ) - but the rest of the loom is still on the bike. I'll have a look at it
for you today and try to identify it.
Best Regards,
Steve.
www.turnerautosport.com
|
|
|
Hellfire
|
| posted on 30/4/05 at 07:05 PM |
|
|
The reply I got from Kawasaki is that it is a brake light connector, but he needs to verify this.
Steve - could you verify for me please. Kwak aren't too strong with replies lately.
|
|
|
