IainB
|
| posted on 3/5/06 at 10:12 AM |
|
|
Megajolt V2
Just got a V2 board which is set up for MAP.
Can i convert this for use with TPS? If so, how?
Many thnaks for any advice,
Iain
http://s43.photobucket.com/albums/e365/IainB1986/
|
|
|
|
|
paulf
|
| posted on 3/5/06 at 10:50 AM |
|
|
You can convert it by removing the MAP sensor and connecting the +5v connection to one end of the Throttle pot , connect the other end of the pot to
neutral and the wiper connection of the pot [signal ] to the output pin position of the MAP sensor.use sheilded cable and feed through a hole in the
case.
I wil find a diagram later on when I have time .
Paul.
|
|
|
rayward
|
| posted on 3/5/06 at 11:27 AM |
|
|
pins as looking at your picture
1 Wiper on TPS
2 Ground
3 +5v
4 n/c
5 n/c
6 n/c
HTH
Ray
|
|
|
.jpg)
