Krismc
|
| posted on 21/6/06 at 04:31 PM |
|
|
Connectors!!
Where is the best place to get connector plugs, so i can remove my dash if need be, some 2 way and 3/4 way ones if possible! decent quality ones!!!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
|
|
ned
|
| posted on 21/6/06 at 04:35 PM |
|
|
vehicle wiring products sell these, boxed sets/kits/inidividually etc.
Ned.
ps i used them from them on my car, here's a pic when it was still a work in progress 
http://www.locostbuilders.co.uk/upload/IMG_2041b.jpg
[Edited on 21/6/06 by ned]
beware, I've got yellow skin
|
|
|
gingerprince
|
| posted on 21/6/06 at 04:46 PM |
|
|
I have used these from Maplin: -
http://www.maplin.co.uk/Module.aspx?ModuleNo=997&criteri
a=connector&doy=21m6
2 way up to 8 way locking connectors.
|
|
|
Krismc
|
| posted on 21/6/06 at 04:58 PM |
|
|
they look cool, and ned that really is work in progress,
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
iank
|
| posted on 21/6/06 at 05:06 PM |
|
|
quote:
Originally posted by gingerprince
I have used these from Maplin: -
http://www.maplin.co.uk/Module.aspx?ModuleNo=997&criteri
a=connector&doy=21m6
2 way up to 8 way locking connectors.
You know they are only spec'ed to 5A @ 50V ac? IIRC for DC you have to reduce the spec.
|
|
|
gingerprince
|
| posted on 22/6/06 at 07:33 AM |
|
|
quote:
Originally posted by iank
quote:
Originally posted by gingerprince
I have used these from Maplin: -
http://www.maplin.co.uk/Module.aspx?ModuleNo=997&criteri
a=connector&doy=21m6
2 way up to 8 way locking connectors.
You know they are only spec'ed to 5A @ 50V ac? IIRC for DC you have to reduce the spec.
I'm only using them for signals and switchgear, nothing high current. Starter switches, immobiliser switches etc are spaded separately.
|
|
|
iank
|
| posted on 22/6/06 at 08:22 AM |
|
|
 seen too many nice cars set on fire by dodgy wiring. For stuff on the low current side of relays those should be fine.
|
|
|
