Ian Pearson
|
| posted on 9/7/06 at 08:04 PM |
|
|
Blade Fuse Tap Adapter
I'm trying to source a Blade Fuse Tap Adapter, and can't find any UK suppliers. Would any of you know where I could gethold of them?
I've attched a couple of links so you'll know what I'm on about!
Tap 1
Tap 2
Tap 3
Many Thanks, Ian.
[Edited on 9/7/06 by Ian Pearson]
|
|
|
|
|
MkIndy7
|
| posted on 9/7/06 at 08:10 PM |
|
|
Never seen any of those, I think male blade terminals fit into the same socket as the fuse, or they might need fileing down a bit.
Can you not get to the back of the fuse box to splice in there and then use an in-line fuse
|
|
|
Ian Pearson
|
| posted on 9/7/06 at 08:20 PM |
|
|
I've tried to get to the back of the fuse box, with no success. I don't want to have to take the dash out as no doubt it'll never be
the same again. There is already one of these fuse adapters in the fuse box, and I thought I'd save myself a shed load of work!
|
|
|
MkIndy7
|
| posted on 9/7/06 at 08:33 PM |
|
|
The electric windows I think it is on some Vauxhalls, I know the Nova had a plug that fitted in the front of the fuse box.
|
|
|
