Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Escort Stalks on a Sierra Column
The Doc

posted on 18/9/06 at 08:13 PM Reply With Quote
Escort Stalks on a Sierra Column

Can it be done?
View User's Profile View All Posts By User U2U Member
Fozzie

posted on 18/9/06 at 09:40 PM Reply With Quote
quote:
Originally posted by The Doc
Can it be done?


Oh yes !!!!!!!!

......but with a modicum of ingenuity and quite a bit of hair pulling.

But worth it......IMHO.

Fozzie





'Racing is Life!...anything before or after is just waiting'....Steve McQueen


View User's Profile E-Mail User View All Posts By User U2U Member
Peteff

posted on 18/9/06 at 10:31 PM Reply With Quote
Which Escort?

Mk3 on may be a straight swap.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
Fozzie

posted on 18/9/06 at 10:40 PM Reply With Quote
Pete, mine was a MK2......

Fozzie





'Racing is Life!...anything before or after is just waiting'....Steve McQueen


View User's Profile E-Mail User View All Posts By User U2U Member
The Doc

posted on 19/9/06 at 05:21 AM Reply With Quote
It's really to try and avoid the use of relays, as the sierra switching aint man enough without.
View User's Profile View All Posts By User U2U Member
Fozzie

posted on 19/9/06 at 08:17 AM Reply With Quote
Yes exactly that! I did use the loom from my donor MK2 for the entire car. I shortened the stalks a tad for neatness, and re-assigned the stalks to varying functions, hence doing away with the need for switches on the dash. The stalks of the MK2 being ally, soooo much nicer than the flimsy Sierra ones anyway......IMO of course!

HTH Fozzie





'Racing is Life!...anything before or after is just waiting'....Steve McQueen


View User's Profile E-Mail User View All Posts By User U2U Member
Schrodinger

posted on 19/9/06 at 03:41 PM Reply With Quote
What wiring loom are you using? as the switches are imaterial if the wiring isn't up to the job
View User's Profile E-Mail User View All Posts By User U2U Member
The Doc

posted on 19/9/06 at 04:44 PM Reply With Quote
Escort Loom
View User's Profile View All Posts By User U2U Member
Schrodinger

posted on 19/9/06 at 05:13 PM Reply With Quote
If the Escort loom dosn't have any relays then you should be ok but if there are any in there ie for the lights then you should keep them as the wires between the switch and the relay may not be up to the current you will be asking them to carry.
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.