vinny1275
|
| posted on 22/9/07 at 07:06 AM |
|
|
EDIS Coil Pack HT leads?
Morning all,
We've bitten the bullet and decided to go for GSXR throttle bodies and megasquirt for the Pinto - as the Pinto was always planned for
replacement at some point, we'll probably re-use the injection setup for whatever comes next.
The EDIS bits have arrived, and I was wondering where I can get the HT leads I'll need for it - they need to have the clip style fittings at the
coil pack end, and normal spark plug leads at the other (the zetec ones fit down through the rocker cover, so I think they're too long for a
SOHC.
Any ideas?
Thanks,
Vince
|
|
|
|
|
pajsh
|
| posted on 22/9/07 at 07:12 AM |
|
|
Following advice from here I bought adaptors from Halfrauds and they are fine.
Around £5 IIRC.
I used to be apathetic but now I just don't care.
|
|
|
big_wasa
|
| posted on 22/9/07 at 07:13 AM |
|
|
From an ENDURA E / Hsc escort or fiesta 
1.1L/1.3L
This car has the correct ends. It has the coil pack on the back of the engine so the leads are a good length.
[Edited on 22/9/07 by big_wasa]
[Edited on 22/9/07 by big_wasa]
|
|
|
britishtrident
|
| posted on 22/9/07 at 08:11 AM |
|
|
quote:
Originally posted by big_wasa
From an ENDURA E / Hsc escort or fiesta
1.1L/1.3L
This car has the correct ends. It uses the coil pack on the back of the engine so the leads are a good length.
[Edited on 22/9/07 by big_wasa]
Look here
http://www.ignitionleads.co.uk/Series.aspx?Man=FORD&Mod=FIESTA%20III
|
|
|
