mkblade
|
| posted on 23/9/07 at 03:40 PM |
|
|
honda fireblade clocks wiring
hi all i hope someone can help me out
basicaly ive changed my fireblade clocks for something different.#
i need to get the mileage back up for my old fireblade clocks for insurance mileage.
these clocks were of a 919cc x reg blade ive tried connecting the lives and earths straight to a battery but nothing .
the wires that come out of the connector are.
red = battery live
black= ign live
ive joined these two together
then two green wires which are earths,joined these two as well
what am i doing wrong??
each wire that i have connected has a very faint grey marks in it (tracer)
thanks
simon
|
|
|
|
|
mkblade
|
| posted on 23/9/07 at 04:18 PM |
|
|
thing is i cant remember what it was last year .ive just renewed the insurance now i got to fill out the mileage form
as adrian flux says i have to state what the mileage was when i changed the clocks as they say i could of gone over the agreed milage although i havnt
put one mile on it in a year due to other stuff going on ect.
|
|
|
worX
|
| posted on 23/9/07 at 04:27 PM |
|
|
I'd give them a call and if you think you are speaking to a reasonable person just explain the situation to them - I am sure that if you were
to get a decent person off the bat they would be relatively ok with what has happened?
Do you have a photo of the back of the clocks?
Steve
[Edited on 23/9/07 by worX]
|
|
|
ASH3
|
| posted on 23/9/07 at 05:52 PM |
|
|
Ive been guessing the mileage for 4 years only when i got it wrong gave
them less miles than last year. Now i
have got to grips with my digital speedo
i am back on a real reading.
Give them a call esp Adrian Flux they are
most understanding.
|
|
|
