omega0684
|
| posted on 18/6/08 at 11:49 AM |
|
|
testing vr sensor
how can you test whether or not the vr sensor is giving off a pulse?
I love Pinto's, even if i did get mine from P&O!
|
|
|
|
|
theconrodkid
|
| posted on 18/6/08 at 01:20 PM |
|
|
wave a screwdriver over the end,you should get 0.5 volts ac
who cares who wins
pass the pork pies
|
|
|
BenB
|
| posted on 18/6/08 at 01:41 PM |
|
|
Plug the input into a cheap amp and spin whatever you're testing up.
As long as you're getting more than 20 pulses per second you should hear something..... Interference might be an issue though....
|
|
|
clairetoo
|
| posted on 18/6/08 at 04:32 PM |
|
|
Everything you ever wanted to know about megasquirt is here 
Although it can be hard work finding the answers 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
tks
|
| posted on 18/6/08 at 05:47 PM |
|
|
measure the resistance if isn't there it wont work..
yupsz an AC voltage swing should be visible...
don't untherestimate the voltage...it really can go high...
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
