Jason Fletcher
|
| posted on 18/7/08 at 09:37 PM |
|
|
whats the smallest "E" marked side repeaters around?
Hi guys
I need to get the smallest side repeaters I can which are E marked to go on some cycle wings. Anyone got any suggestions?
cheers
jason
[Edited on 18/7/08 by Jason Fletcher]
|
|
|
|
|
LBMEFM
|
| posted on 19/7/08 at 06:02 AM |
|
|
Have you looked at Demon Tweeks Motorcyle Direct. They have some repeaters for bike fairings that are pretty small. Check out their web-site and look
at Micro fairing indicators.
Barry
|
|
|
adithorp
|
| posted on 19/7/08 at 08:21 AM |
|
|
Your lights don't have to be E marked or, more importantly, the approved E mark for that use (car lights differ from bikes). They just have to
be of "similar brightness" to the approved marked lamps.
adrian
|
|
|
scootz
|
| posted on 19/7/08 at 10:48 AM |
|
|
That's what I was thinking... none of your lights HAVE to be e-marked. Just fit for purpose.
|
|
|
scootz
|
| posted on 19/7/08 at 10:59 AM |
|
|
Which brings me onto... LED strips!!!
No - not for detailing (chavtastic)... for the rear lights!
I would like to try and have 3 horizontal strips on either side running parallel to each other and wrapping slightly around the rear corners.
If you look at this Lotus picture... forget the light cluster, but concentrate on the 2 grooves. Imagine 3 of those filled with the necessary
LED's.
Am I pushing the boundaries of acceptability?
|
|
|
speedyxjs
|
| posted on 19/7/08 at 11:09 AM |
|
|
Whether its legal or not, it would certainly look very cool 
How long can i resist the temptation to drop a V8 in?
|
|
|
