Mark G
|
| posted on 31/8/08 at 07:09 PM |
|
|
Blade HT Leads
Hi all,
I started positioning things around my engine bay today and have decided that I need to lengthen my HT leads. They are all pretty nackered and could
do with some new plug ends anyway.
Has anyone found anywhere that sell the correct ends and leads for the fireblade engine (893), or does anyone know of anywhere that may sell lengths
of SVA safe lead.
Thanks
Mark.
|
|
|
|
|
ReMan
|
| posted on 31/8/08 at 07:23 PM |
|
|
The original ends come off easily and can then be put onto new lengths of HT cable of your choice. But don't get the very fat cable it wont fit
|
|
|
Hellfire
|
| posted on 31/8/08 at 07:45 PM |
|
|
Ideally, you need 7mm HT cable, although the 8mm can be made to fit. Position your coil packs and then measure the individual lengths. Leads can be
obtained from Vehicle Wiring Products (amongst others)
Phil
|
|
|
Mark G
|
| posted on 10/9/08 at 07:32 PM |
|
|
Help, I'm about to place an order for a length of ht lead, Do I need carbon cored or copper cored?
Mark.
|
|
|
