Coopz
|
| posted on 17/2/10 at 07:10 PM |
|
|
06 R1
Hi guys,
Really struggling getting my head round the loom... First real auto wiring. I have had a look at relevant build diaries just not sure at all. How
would I go about starting her up this weekend I plugged the loom all in I think and the relevant wires have been joined. I want to run a lucas key
on/off fro ignition with a savage start button any basics on how to wire these?
Any info appreciated
|
|
|
|
|
corrado vr6
|
| posted on 17/2/10 at 07:19 PM |
|
|
hi mate you have u2u if its not what your after let me know Greg
http://r1indy7.wordpress.com/
|
|
|
dazzx10r
|
| posted on 17/2/10 at 09:33 PM |
|
|
simple, just lengthen the bikes ignition barrel wiring to use the std barrel and key and use the 2 wires out of the starter circuit to your start
button. Where are you located mate? I've just this weekend done all my starter wiring (ZX10r MK Midi).
|
|
|
Coopz
|
| posted on 17/2/10 at 10:43 PM |
|
|
Cheers for the U2U will let you know how I get on I was getting a little confused as Mk had taken the white 2/pin with brown/blue and red wire out of
the bike look completely but have soldered up the rest of the connections needed which is good..... Stay near your computer over the weekend  Dazz
i'm in purley (near croydon)
|
|
|
