dilley
|
| posted on 12/10/10 at 08:55 PM |
|
|
indicator confusion..
I have decided to remove and replace my 2001 busa indicator/side stand relay, the origional relay has 2 wires (indicators) I have tried to fit an
after market 2 pin flasher relay but the indicators do not flash!!! any ideas???
|
|
|
|
|
Andy W
|
| posted on 12/10/10 at 09:08 PM |
|
|
Check the amps on the one you fitted, may not be up to the job, especially if you tried the hazards. My bike one that was supposed to handle the
current failed. I replaced it with a three wire one, seem to remember it only needed another feed or earth wiring.
Andy
|
|
|
