r1_pete
|
| posted on 31/5/12 at 09:53 AM |
|
|
Honda CDI units
I'm very slowly building a Honda CB750, it wont be standard but wont be a full blown cafe racer either.
I'm planning on using a fireblade ignition system, because I have all the bits left over from when I ran a 1996 fireblade.
Question is, how will the CDI unit behave without a TPS connected, I really don't want to mess with fitting one to the carbs, will the CDI work
as per a Pre 96 (RRS/T) blade CDI which doesn't take a TPS? Or am I better finding an RRS/T CDI.
Cheers.
Pete.
|
|
|
|
|
MakeEverything
|
| posted on 31/5/12 at 11:28 AM |
|
|
If it works the same way as megasquirt (TPS / Fuel Logic) then it will need the TPS to calculate acceleration enrichment. It cant be too difficult to
add one though?
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
Peteff
|
| posted on 31/5/12 at 05:48 PM |
|
|
I think TPS just retards the ignition or operates a solenoid to enrich the top end mixture on fireblade carbs so it should run without it using the
750 carbs.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
