monck
|
| posted on 26/8/12 at 09:07 AM |
|
|
Is it possible to run two rev clocks ..
Hi i would like to know if i could run two rpm gauges as the one in my dash is out of view when driving i want to mount a small one up on my dash ..
is this possible or can it not be done ?
Might be a stupid question but thought id ask before getting one ..
Ryan
[Edited on 26/8/12 by monck]
|
|
|
|
|
Neville Jones
|
| posted on 26/8/12 at 10:47 AM |
|
|
I've done it using a few transistors, just to isolate each signal.
|
|
|
BenB
|
| posted on 26/8/12 at 11:20 AM |
|
|
The rpm signal is quite robust, I'd imagine even just sticking a few diodes in would do the job.
|
|
|
blakep82
|
| posted on 26/8/12 at 12:58 PM |
|
|
what ignition are you using?
i've got a megajolt, with edis 4, and if i remember right, both the edis and megajolt both have rev counter outputs
you've got throttle bodies i see, but no mention of what ignition system. if a megasquirt, have a look through the wiring maybe you have 2
seperate outputs too?
I've got more of a shift light type thing. the megajolt has 4 user outputs and 1 shift light output, so i've got 5 LEDs, each of the 4
user outputs to come on an a different RPM, and the shift light set to an RPM too
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
maccmike
|
| posted on 26/8/12 at 02:18 PM |
|
|
Iv got a rev gauge and a digital dash, but im on carbs not throttle bodies if it makes a difference.
|
|
|
monck
|
| posted on 26/8/12 at 07:38 PM |
|
|
Yes i have Throttle bodies run on a Megasquirt 2 v3 ecu if that makes any diffrence .. so it seem's it can be done ?
|
|
|
