steve m
|
| posted on 9/10/12 at 08:02 AM |
|
|
points and coil wireing
I am trying to sort a missfire out, and have ditched the lumention for points and condensor, just for a trial
even if this doesnt cure the problem, i will still carry the points as a back up
But, for the life of me, i can not remember the wiring diag
in my circuit i have
one distributor
one coil + and - connections
electric rev counter
This is all standard ford wiring
Steve
|
|
|
|
|
snapper
|
| posted on 9/10/12 at 09:57 AM |
|
|
Google is your friend
Wiring
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
steve m
|
| posted on 9/10/12 at 11:04 AM |
|
|
Thanks!
I did try searching, but that one is exactly what i want!
regards
steve
|
|
|
snowy2
|
| posted on 9/10/12 at 08:04 PM |
|
|
Missfire....often weak mixture or air leak....check inlet manifold gasket.
sometimes you are the pigeon, most of the time the statue.
|
|
|
steve m
|
| posted on 9/10/12 at 08:14 PM |
|
|
Missfire, was caused by a new carb gasket that was thinner in the middle, and allowing air in
only found it by spraying easy start about!!
All fixed now, with thicker gaskets
Steve
|
|
|
