David Jenkins
|
| posted on 20/3/09 at 08:18 PM |
|
|
CBR600 TPS wiring
This question came up in the Wanted forum, so I thought that I'd shift it to here! 
I've just got a proper connector for my Honda CBR600 FX bike carbs. Mark (tul214) asked me if I'd identified which wire was what, so I
thought I'd post a piccy and some words...
 
TPS wires
Starting from the left:
Blue wire = chassis / earth (ideally the Megajolt common earth)
Yellow/blue = TPS potentiometer wiper -> TPS signal -> Megajolt pin 9
Yellow/black = Vref -> Megajolt pin 6
|
|
|
|
|
tul214
|
| posted on 20/3/09 at 09:12 PM |
|
|
David....your a star 
1.6 Raw Super6 sold
|
|
|
bikecarbfred
|
| posted on 11/4/21 at 10:08 AM |
|
|
Sorry to bring this old thread back up but having a few issues with this particular sensor 1999 f4 CBR600
What's odd is when I swap and put voltage to middle pin and signal cable to pin 3. basically swap those too and it works on megajolt.
but if i wire it the way the picture shows then megajolt doesnt see it.
the wiring on megajolt plug side is bang on.
ive been running like this for a few years but now i am having issues with erratic tps.
|
|
|
