Tartanpimpernel
|
posted on 16/11/09 at 01:59 PM |
|
|
quick release electrics
Just about to mount my etb digidash2 on the back of my steering wheel which is removeable, can anyone recommend a quick release cable fitting I can
use on the back of the dash so I can remove it along with my wheel ?
seen a few on various cars but cant track down what i`m after.
ta
-c-
|
|
|
chrsgrain
|
posted on 16/11/09 at 02:10 PM |
|
|
Vehicle wiring products here will sort you out. Any
problems call and chat to them, very helpful guys.
Chris
Spoing! - the sound of an irony meter breaking...
|
|
RickRick
|
posted on 16/11/09 at 02:18 PM |
|
|
i was tempted to do the same with my dash what do you plan doing to allow the cable to twist with the wheel
|
|
blakep82
|
posted on 16/11/09 at 02:25 PM |
|
|
quote: Originally posted by RickRick
i was tempted to do the same with my dash what do you plan doing to allow the cable to twist with the wheel
not doing it myself, but that curly wire (telephone type stuff) should sort that out
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
Tartanpimpernel
|
posted on 16/11/09 at 03:00 PM |
|
|
thanks for the replies guys.
yep would be the curly wire type as blakep82 mentioned, seems to work a treat.
cheers
-c-
|
|
Tartanpimpernel
|
posted on 16/11/09 at 03:00 PM |
|
|
I have a picture of pretty much the exact setup I`m after on my computer at home, I`ll try and post it up tonight.
-c-
[Edited on 16/11/09 by Tartanpimpernel]
|
|
GeorgeM
|
posted on 16/11/09 at 03:17 PM |
|
|
could always give ETB instruments a call
01702 601055, they make them.
I got my curly cable there
GeorgeM
My conscience is clear - I drive a GREEN car
MNR Racing
essexkitcarclub.com
|
|
JoaoCaldeira
|
posted on 16/11/09 at 03:45 PM |
|
|
I've got 2 buttons in the removable steering wheel (shift up / down).
I'm using telephone curly cable and a connector from something audio (4 connectors' jack with a nut on top).
I can take a pic if you want...
Joao
|
|
Tartanpimpernel
|
posted on 16/11/09 at 04:02 PM |
|
|
thanks george, just looked through the box from ETB and they have a list of accessories and one of them shows the cable I`m after.
if you could shoot me a pic that would be great Joao.
cheers
-c-
quote: Originally posted by GeorgeM
could always give ETB instruments a call
01702 601055, they make them.
I got my curly cable there
GeorgeM
|
|
daniel mason
|
posted on 16/11/09 at 06:30 PM |
|
|
i failed sva with one of them curly wires as it was not secured at the recommended spacings and if it was it would wrap around boss when on full lock
fouling the steering! i would imagine iva is same.
|
|
fluidslvr
|
posted on 16/11/09 at 08:17 PM |
|
|
i used these from RS
|
|