sebastiaan
|
| posted on 26/2/10 at 07:46 PM |
|
|
Wiper arms, will these fit?
Hi!
I installed my wiper motor (mini type) a few weeks ago and am now looking for arms and blades to fit. My car is LHD as i'm in the Netherlands. I
* think* land rover arms might fit; problem is that there is loads of different ones. I found these:
http://cgi.ebay.co.uk/Land-rover-windscreen-wiper-arm-NEW-PRC4277_W0QQitemZ360224939082QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=
item53df145c4a on Ebay, but am unsure if they'll fit my wiper boxes. Does anyone know?
Alternatively, a good (locost!) source of wiper arms in black for a mini would be greatly appreciated.
Thanks!
Sebastiaan
|
|
|
|
|
RK
|
| posted on 26/2/10 at 09:50 PM |
|
|
CBS has what you want, but be careful they are the right size for the wheelboxes - I ordered some mini ones and they are too small for the MGB boxes I
have. Wipers are a big pain in the bum.
|
|
|
rusty nuts
|
| posted on 27/2/10 at 07:09 AM |
|
|
I have MG Midget arms on my car , had to shorten them slightly but that was easy . Remove the rivets , shorten the arms , redrill and rivet. Not sure
if they are available in black .
|
|
|
RK
|
| posted on 28/2/10 at 01:51 AM |
|
|
Shortening is easy, but you can't do much about the spindle diameter.
|
|
|
.jpg)
