SausageArm
|
| posted on 14/4/11 at 01:02 PM |
|
|
Freelander diff, anyone running fairly big power/torque through one?
As the thread title, I'm wondering if anyone is running a fairly high power/torque engine through a Freelander diff? and how the diff has
coped?
I will be running switchable maps for low/high boost settings, hopefully giving between 300bhp/140lbft and 450bhp/250lbft, I know the torque is not
that high compared to the standard freelander engine but the power is up a bit, just wanting to know how it will hold up, if anyone has any personal
experiences it'd be great to hear them. 
|
|
|
|
|
fesycresy
|
| posted on 14/4/11 at 01:08 PM |
|
|
Westfield stopped using them because Megabusa's were lunching them.
I wouldn't hold out much hope!
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
iain b
|
| posted on 14/4/11 at 01:32 PM |
|
|
yes i also heard of busa powered cars ripping them to shreads...
|
|
|
Flamez
|
| posted on 14/4/11 at 01:58 PM |
|
|
mac1 use them in their zx10r powered cars with no trouble. Mines ok anyway.
my build mac1motorsports
|
|
|
paublo999
|
| posted on 14/4/11 at 02:12 PM |
|
|
I have one with Quaife internals with a supposed 183 bhp at the wheels. Also now running really soft Avon slicks. After two events no failures so
far!
Fingers crossed.
Cheers
My videos http://www.youtube.com/user/ninjabogeyracing
|
|
|
SausageArm
|
| posted on 14/4/11 at 06:10 PM |
|
|
quote:
Originally posted by fesycresy
Westfield stopped using them because Megabusa's were lunching them.
I wouldn't hold out much hope!
Uh oh.
quote:
Originally posted by iain b
yes i also heard of busa powered cars ripping them to shreads...
Oh dear!
quote:
Originally posted by Flamez
mac1 use them in their zx10r powered cars with no trouble. Mines ok anyway.
This is true, I have a zx10r turbo Mac Worx, hence the wondering about the Freelander rear diff being up to the job, suppose time will tell, lol.
quote:
Originally posted by paublo999
I have one with Quaife internals with a supposed 183 bhp at the wheels. Also now running really soft Avon slicks. After two events no failures so
far!
Fingers crossed.
Cheers
Is it the Quaife ATB internals you have? How do you find it drives compared to the standard diff?
|
|
|
INDY BIRD
|
| posted on 14/4/11 at 06:22 PM |
|
|
yep also running one as per pauls, 120Ft pounds torque 190bhp 3 track days and 400 miles no issue yet touch wood finger x, etc,
but with 400+ bhp i am not sure, is it the wuaiffe internals and lock up or open diff?? i ran a sierra 338 with 300+bhp and was ok,
cheers
|
|
|
paublo999
|
| posted on 14/4/11 at 06:32 PM |
|
|
I've only ever use the Quaife from new in it. I wouldn't consider a big power upgrade without it personally.
To take the power I have, I use the Quaife and a CycleLogic lockup clutch kit and check the duff mounts and prop bolts every few events.
Cheers
My videos http://www.youtube.com/user/ninjabogeyracing
|
|
|
.jpg){kind=avatar}
