sdh2903
|
| posted on 20/4/12 at 02:09 PM |
|
|
exhaust tip for r1 carbon can wanted
As above i'm after a 90 degree stainless tip with a rolled end for my R1 can. Like this:
I know people have made their own by welding a ring onto a 90 but I dont have a tig welder so need one made, I was going to have a bash using a mig
with the right wire and gas but I have a feeling I will make a pigs ear of it.
cheers
Steve
|
|
|
|
|
joemotion
|
| posted on 20/4/12 at 04:19 PM |
|
|
There is a chap on here who made one for me but can't remember his name. I will have a look later when back home.
|
|
|
sdh2903
|
| posted on 20/4/12 at 04:59 PM |
|
|
cheers, that would be great.
|
|
|
maccmike
|
| posted on 20/4/12 at 05:16 PM |
|
|
JP exhausts in cheshire will make one
|
|
|
joemotion
|
| posted on 20/4/12 at 05:29 PM |
|
|
It was Andy W on this forum
|
|
|
ReMan
|
| posted on 20/4/12 at 05:39 PM |
|
|
NICE CAR!
I've had two and I'm sure I got them both of Ebay, but I can;t find anyone selling them at the moment.
You gan get them without rolled end, if its not for IVA?
www.plusnine.co.uk
|
|
|
ReMan
|
| posted on 20/4/12 at 05:41 PM |
|
|
BTW the bit that is welded is hidden behind theehauast end trim, so you can do it with a normal m/s MIG good enough
www.plusnine.co.uk
|
|
|
sdh2903
|
| posted on 20/4/12 at 08:00 PM |
|
|
quote:
Originally posted by ReMan
NICE CAR!
I've had two and I'm sure I got them both of Ebay, but I can;t find anyone selling them at the moment.
You gan get them without rolled end, if its not for IVA?
I know its nice it took a lot of my effort to build it
I've scoured Ebay and the t'internet today while I was supposed to be working but couldn't find anything.
I've U2u'd Andy w to see if he still does them, cheers for the info
|
|
|
renetom
|
| posted on 23/4/12 at 05:40 PM |
|
|
exhaust tip
Hi
We used a 2" S/steel elbow & a straight chrome rolled in tip, pop rivetted
Passed IVA ok
both available on ebay
Ours is not an RI can, but I think is the same size, see our photo archive.
good luck.
René
|
|
|
