Mash
|
| posted on 8/6/16 at 09:33 PM |
|
|
Wiring a Smiths RVC rev counter
Managed to get this cheap on fleabay
[img]
 
Smiths Rev counter
[/img]
but struggled to find out how to wire it up for coil/dizzy. Sussed it eventually but the web/google wasn't massively helpful. so here's
the back
 
rev counter rear
A = connect to the -ve side of the coil (side that goes to distributor)
B = connect to the +ve side of the coil
C = ground
That works for me anyway 
|
|
|
|
|
alfas
|
| posted on 14/6/16 at 09:15 AM |
|
|
http://www.gomog.com/allmorgan/smithsclassic.html
[Edited on 14/6/16 by alfas]
|
|
|
Mash
|
| posted on 10/8/16 at 08:21 PM |
|
|
Thanks alfas, yes I found that diagram, and lots of other similar ones, but it doesn't relate to whats on the back of the tacho, so I eventually
worked it out by trial and error
|
|
|
r1_pete
|
| posted on 10/8/16 at 10:52 PM |
|
|
Correct wiring is
A - points side of coil.
B - switched live
C - ground
Coil + is switched live, so you'll be ok.
|
|
|
