Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Flexible Hoses
AndyPump

posted on 23/6/17 at 04:08 PM Reply With Quote
Flexible Hoses

Does anybody remember what flexible hoses will fit a locost haynes roadster with sierra running gear. Cheers Andy S.
View User's Profile View All Posts By User U2U Member
voucht
Contributor






Posts 240
Registered 22/5/11
Member Is Offline

Photo Archive Go!
Building: Haynes roadster on the road since november 2014 bu

posted on 23/6/17 at 05:24 PM Reply With Quote
If the chassis is as per the book'sdesign:

Front :
- straight male M 10x1,00 (caliper side)
- 450mm long
- straight male M10x1,00 bulkhead fitting (chassis side) + lock nut

Rear : depends if you have disc or drum set up, and where the brake line bracket CP23 is welded on the chassis (mine is under RS7/RS7a unlike the books design where it is on the back side of RS14).
Anyway, an M10x1.00 male fittings will fit both drum and caliper. After you'll have to measure the length you need. Then a straight male M10x1,00 bulkhead fitting on the chassis side + lock nut.

I wrote this page about the drum set up on a Haynes years ago, at that time I could supply custom made brake lines (and I did quite a lot) but no longer can.
But it can give you informations you need
https://sites.google.com/site/hydraulicforki tcars/custom-brake-hoses/custom-brake-hoses/special-case

Hope that will help





https://vouchtroadster.blogspot.com/
https://cafrazx550.blogspot.com/

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.