christim
|
| posted on 7/3/21 at 10:24 PM |
|
|
Sourcing parts for OEM ECU setup
I got the engine turning over the other day, one step closer to firing up. So now thinking about the electrics for that...
I've got all the 1999 blacktop Mondeo loom back to the 42 pin plug with a matching ECU and key, and the entire Sierra loom. Reading
Big-wasa's excellent thread on OEM ECU it looks like I'm going to need the immobiliser led and wiring plug for the immobiliser
tranceiver.
Quick trawl online isn't bringing too much up...any thoughts on where to get these?
My Build Thread
|
|
|
|
|
pekwah1
|
| posted on 7/3/21 at 10:45 PM |
|
|
The PATS transponder sits around the key barrel under the steering wheel cowling.
The good news is they’re not coded so can use any from the same generation engine.
You can use any standard LED, you won’t need the one from the car.
Easiest way will just be to find someone breaking a car.
|
|
|
christim
|
| posted on 7/3/21 at 11:01 PM |
|
|
Cheers I've got the transponder itself just not the wiring plug for it (worst case will be I just wire each pinout to a suitable connector)
My Build Thread
|
|
|
pekwah1
|
| posted on 7/3/21 at 11:07 PM |
|
|
I’ve needed a few extra bits for my zetec conversion, again I just find someone breaking a car and ask them to post the chopped off wire with the
connector, probably worth a look online!
|
|
|
big_wasa
|
| posted on 8/3/21 at 06:00 AM |
|
|
I might have a spare plug. But it's probably going to be next weekend before I can get in there and look
|
|
|
christim
|
| posted on 8/3/21 at 10:49 AM |
|
|
quote:
Originally posted by big_wasa
I might have a spare plug. But it's probably going to be next weekend before I can get in there and look
Aah cheers Wasa if you do! Otherwise yep I'll look to find someone breaking, or crack out the soldering iron 
My Build Thread
|
|
|
