Micael
|
| posted on 15/3/05 at 08:56 AM |
|
|
Zetec Cooling... Oh no! not again!
I have looked at the plumbing drawings at Zetec-cat and I was thinking if I could smplify the plumbing a bit.
Here is what I came up with. Would this work?
 
Rescued attachment cooling-system-simp1.jpg
Micael Moose Åman
Petrolhead and all around nice guy
"Don't leave the duck there. It's totally irresponsible. Put it on the swing, it'll have much more fun." //Sleep Talkin Man Dec 23
2009
|
|
|
|
|
Lozec
|
| posted on 16/3/05 at 03:53 PM |
|
|
Come on guys, someone must have tried this and know if it'll do the job! 
|
|
|
zetec
|
| posted on 16/3/05 at 10:30 PM |
|
|
Almost there. The large thermo housing outlet is as per the diagram to the rad top hose. The two other mid size ones to join into the bottom hose
between the rad and water pump. The expansion tank is teed into the offside mid size pipe on its route to the bottom hose connection. The small outlet
to the exp tank small neck connector.
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
|
