JoaoCaldeira
|
| posted on 19/5/06 at 10:31 PM |
|
|
Wrong disc adaptor plate or callipers?
Hi all.
I got the MNR drum to disc adaptor plates and later I discovered some very nice refurbished
calipers in the midle of all the stuff I bought from MNR (yes.. I paid them
later  as it was not supposed to be there )
The center to center of the holes in the
* adaptor plate: 9cm
* caliper: 12cm
Which calipers are these? Sierra?
What does use the 9cm spacing? VW Golf? Pug 205?
Thanks for all your help,
Joao
|
|
|
|
|
JoaoCaldeira
|
| posted on 19/5/06 at 10:32 PM |
|
|
...
 
Rescued attachment 06-05-19_23-10.jpg
|
|
|
muzchap
|
| posted on 19/5/06 at 10:33 PM |
|
|
They dont look like my Sierra calipers?
Have you got a better picture? 
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
James
|
| posted on 19/5/06 at 10:51 PM |
|
|
quote:
Originally posted by muzchap
They dont look like my Sierra calipers?
Agreed. Odd looking caliper.
HTH,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
JoaoCaldeira
|
| posted on 20/5/06 at 06:29 AM |
|
|
I agree... very bad angle... it was just to compare the holes in both calipers and plate.
Here a couple more
Thanks for all your help,
Joao
[Edited on 06/5/20 by JoaoCaldeira]
[Edited on 06/5/20 by JoaoCaldeira]
|
|
|
Avoneer
|
| posted on 20/5/06 at 07:32 AM |
|
|
IIRC, it is a rear Sierra one, but you're missing the small slider bracket like the ones on the fronts.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
Hellfire
|
| posted on 20/5/06 at 10:05 AM |
|
|
quote:
Originally posted by Avoneer
IIRC, it is a rear Sierra one, but you're missing the small slider bracket like the ones on the fronts.
Pat...
It is a rear sierra caliper but as Pat says it is missing the slider...
|
|
|
Danozeman
|
| posted on 20/5/06 at 11:07 AM |
|
|
As both above. Sierra one with missing slider.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
JoaoCaldeira
|
| posted on 20/5/06 at 01:34 PM |
|
|
Thank you all very much
Joao
|
|
|
Mr G
|
| posted on 20/5/06 at 04:45 PM |
|
|
As far as I know all recon calipers don't come with the carrier as in your case.
Normal is getting dressed in clothes that you buy for work and driving through traffic in a
car that you are still paying for - in order to get to the job you need to pay for the clothes
and the car, and the house you leave vacant all day so you can afford to live in it.
|
|
|
Krismc
|
| posted on 20/5/06 at 05:03 PM |
|
|
yea i had this problem when i got my refurbed ones, so marc gave me a set of sliders, ive just been to scrappy and got another set to give to him as a
replacement!!
plus you will need the slider pins- i bought from ford at a astonishing £8 each (x4)
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
mnr laptop
|
| posted on 21/5/06 at 07:26 AM |
|
|
hi jaoa we have just had a load of sliders back from the powdercoaters if you want a pair let me know asap then they can come with the uprights etc
best regards
marc
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
%20(WinCE).JPG)
