cct7kitcars
|
| posted on 3/10/07 at 01:59 PM |
|
|
spigit bearing for a zetec needed
can some one point me in the right directionfor a spigit bearing ford number 1554973 so i can put a zetec onto a type nine gerabox
joe
Life should not be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, Chardonnay in one hand, Tequila in the other, body bearing battle scars and totally worn out, screaming- WOO HOO!! What a Ride!
|
|
|
|
|
r1_pete
|
| posted on 3/10/07 at 02:03 PM |
|
|
Easy obtainable at Ford agents, someone posted some for sale on here a while back, check the for sales he had several.
|
|
|
stevec
|
| posted on 3/10/07 at 02:03 PM |
|
|
Try this guy on here.
Steve.
linky
|
|
|
Peteff
|
| posted on 3/10/07 at 02:06 PM |
|
|
Mine was £4 from the local parts shop, roller bearing and same as pinto according to the counter assistant.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
SeaBass
|
| posted on 3/10/07 at 02:17 PM |
|
|
Burton Power
Some Ford dealers are now unable to supply it... I tried a couple.
|
|
|
Werner Van Loock
|
| posted on 3/10/07 at 02:50 PM |
|
|
INA HK1518RS it's a regular needle bearing with a dust seal on 1 side (gearbox side)
Can be bought at any bearing supplier for about 3 quid
|
|
|
Jules
|
| posted on 17/10/07 at 03:46 PM |
|
|
I had to put one in an audi a4 and i used my zetec one as it was a Sunday, I know the audi one would be more expensive bit it fitted.
|
|
|
