MK Goldrush
|
 posted on 26/9/03 at 05:33 PM |
|
|
Wiring Loom
Wiring up a MK Indy soon with Blade Engine. What's the easiest/best way joining engine loom to Sierra ancillaries? There are so many options
available  I'm in a bit of a dilemma... just want something easy'ish and 'locost' rather than BUY a third-party intermediate
loom.
Help me out lads!!!
|
|
|
|
|
JoelP
|
| posted on 26/9/03 at 05:40 PM |
|
|
not a clue, but if i was in the situation id start with a big piece of blank paper and a pencil.
then work out what engine wires the blade has, ie sparking, sensors and chips etc.
then work out which fuse box u gonna use, and merge them from that.
maybe use both fuse boxes, with engine wires from one and ancilliaries from the other? just an idea...
[Edited on 26/9/03 by JoelP]
|
|
|
david cromie
|
| posted on 26/9/03 at 10:31 PM |
|
|
wiring loom
check out dodgy Rodger,s website, a great site, he covers what you are looking for. david
|
|
|
