bikkel
|
posted on 20/1/08 at 08:40 PM |
|
|
picture request zx12R
hi there,
i noticed recently that my zx12r has ?no crankbreather pipe/hose.
Does anyone have a clea picture of the engine showing where the breather should be located?
i guess mine is blocked off by a bolt?
thanks
koen
www.zx12r-indy.tk
www.zx12r-indy.tk
|
|
|
Hellfire
|
posted on 20/1/08 at 09:02 PM |
|
|
This is about the only picture I can find that shows the crankcase breather on the ZX12R. The outlet is directly below the chrome K&N filter and
connects to it via a short length of rubber pipe.
Phil
![](/galpreviews/Engine Other Side.JPG) ![Crankcase breather](/gallery/Engine Other Side.JPG) Crankcase breather
It's difficult to tell from the photo but the outlet for the crankcase is directly above the sprocket adapter and next to the top engine
mounting.
[Edited on 20-1-08 by Hellfire]
|
|
bikkel
|
posted on 21/1/08 at 06:48 PM |
|
|
thanx hellfire
www.zx12r-indy.tk
|
|
Hellfire
|
posted on 21/1/08 at 07:38 PM |
|
|
No problem Koen. If you need any photographs from a different angle, just let me know.
Phil
|
|
Smartripper
|
posted on 21/1/08 at 08:06 PM |
|
|
Hello,
Maybe this can help
Daniel
[Edited on 21/1/08 by Smartripper]
![](/galpreviews/a679984-199.jpg) ![Rescued attachment 199.jpg](/gallery/a679984-199.jpg) Rescued attachment 199.jpg
|
|
welderman
|
posted on 21/1/08 at 10:46 PM |
|
|
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
bikkel
|
posted on 27/1/08 at 02:48 PM |
|
|
i think i found it:
but just 1 question be sure:
a blanking plug is bolted in a hole there;
is the breather thread horizontal and approx. 18 mm???
i will have to find a pipe that i can connect the hose on and lead it to the catch tank
answers/pics appreciated!
thanks
koen
www.zx12r-indy.tk
|
|
Hellfire
|
posted on 27/1/08 at 05:37 PM |
|
|
Hi Koen, that sounds like the one although it's 16mm.
The breather is circled in the photo below.
Phil
![](/galpreviews/IMG_2086.JPG) ![Crank Breather 1](/gallery/IMG_2086.JPG) Crank Breather 1
And a bit closer looks like this
![](/galpreviews/) ![](/gallery/)
From a slightly different angle. A bit blurred but should help ............
![](/galpreviews/) ![](/gallery/)
|
|
bikkel
|
posted on 27/1/08 at 08:53 PM |
|
|
thank u very much , HELLFIRE :->
my breather was invisible due to the wiringloom and engine mount blocking the view.
I will ask a friend with a lathe to make me one.
thx
koen
![](/images//smilies/bigsmile.gif)
www.zx12r-indy.tk
|
|