peterparsons
|
| posted on 25/1/08 at 01:21 PM |
|
|
sierra stalk wiring
I've seen these drawings in colour - showing the cable colours, but can't find it.
Does anyone have a copy please.
|
|
|
|
|
BenB
|
| posted on 25/1/08 at 01:36 PM |
|
|
Just be careful re such diagrams. Looms differ from one make to the next. Depending on which loom you're using (and how they've set up the
relays etc) those may or may not be the right connections!!
Plug and pray is one approach.
Personally I'd use those as a starting point but work out what they're actually doing.
Case in point- the windscreen wiper connector wiring on the Robin Hood Owners site looked very much like it would work for my STM loom (same wire
colours and everything). If I'd done it that way though I would have fried my wiper motor as a couple of the wires were transposed...
|
|
|
stuart_g
|
| posted on 25/1/08 at 02:12 PM |
|
|
there are two different versions of the sierra stalks. Make sure the diagram is for your version.
|
|
|
l0c0st
|
| posted on 25/1/08 at 08:29 PM |
|
|
Hopefully the picture will be below, if not it is in my photo archive.
I can't remember who it was who originally did the colour version, it wasn't me.
I think these are for the later (BG87?) switches, but worth checking before going live.
HTH
 
Sierra stalks in colour
Text
|
|
|
Schrodinger
|
| posted on 26/1/08 at 08:02 PM |
|
|
quote:
Originally posted by stuart_g
there are two different versions of the sierra stalks. Make sure the diagram is for your version.
And the rest ! There are about 5 of them from memory, Have a look in the wiring diagramme in a Haynes manual.
The best way is to play with a multimeter and see what happens.
Keith
Aviemore
|
|
|
