Not entirely sure what to say about this fine steed but after much deliberation its for sale!

-2004 model MK Indy correctly registered with a private plate included
-1.8 Fiesta RS1800 zetec engine fitted with a new LUK 1.8 clutch kit including LUK release bearing and 1.8 flywheel (replaced a 2.0 pinto)
-Sparks are provided by a Megajolt lite using MAP taken from each inlet runner
-Type 9 with short shifter
-ZX9r carbs on a Danst aluminium inlet manifold inc Fluoro lined silicone pipes tuned by Russ at Torquetune to give a healthy 145bhp at crank.
-13" Minator minilite style alloys with 185/70/13 Yokohama AO21R tyres (they've taken me to the Scottish highlands and back and one track day)
-AVO adjustable shocks all round
-Lightweight fibreglass seats (with carbon look foam inserts professionally made by Roadrunner SR2 guys)
-GBS exhaust manifold mated to a repackable MK exhaust can (quiet enough for track days and sleeping babies)
-Wilwood powerlite calipers with drilled and grooved discs using mintex 1144 pads, drums on rear
-Has MOT til March 15 and Tax til end August

Will come with a spare 2.0 silvertop zetec engine that requires attention due to oil starvation relating to a poorly plumbed oil filter relocation kit, i have other sundry spares that will be included in the sale, clutch cables, throttle cables, coil packs, plug leads, 1.8 flywheel, shortened but cracked sump etc etc

The car HAS been used on track and HAS been to the highlands of Scotland this Easter and is quite happy in either setting but is not happy sitting in the garage and thus is for sale.

I will get some pictures loaded at the weekend when shes had a bath.

£6250

Sunny Wednesday bump

My old car that ,

had a few mods since but still looking well ,

good luck with the sale

Ray

Hi,

Im quite new to the Kit Car scene, and I'm looking to buy my first.

Is this still for sale? It is within my budget and your not to far away...

Hi, yes still available. Feel free to pm me for more details or to arrange a viewing

Hi Keith, you have a PM

Thanks

Darren

Thanks Darren, just replied via PM