Dean m
|
| posted on 18/5/16 at 04:41 PM |
|
|
Dean's mx5 Haynes build
Hi, complete novice in the kit car world here.
Little bit about me, I am an ex-RAF aircraft engineer now working as mechanical maintenance engineer in a factory.
I have been wanting to build a seven type car for years, drooling over them at shows and had a ride in a S2000 powered MK Indy around bruntingthorpe,
what an experience that was!!!
I've now took the plunge and started stripping the donor car and have a flat pack kit from Talon sat in the garage.
In preparation for the build, I went to night school last year on a welding course.
Earlier this year I bought a very very rusty 1.6 Eunos Roadster to use as the donor
Body coming off
[img] [/img]
 [/img]
[img] [/img]
The flat pack kit from Talon
[img] [/img]
|
|
|
|
|
garyt
|
| posted on 18/5/16 at 06:08 PM |
|
|
Hi and welcome good luck with the build and we like pictures and plenty of them and don't forget the only silly question is the one you
don't ask
All the best Gary
remember we are not mad just creatively insane !!!!!
|
|
|
big_wasa
|
| posted on 18/5/16 at 07:03 PM |
|
|
Love a scratch build so loads of pics, I want to get my next one started.
|
|
|
Luego.2.0
|
| posted on 18/5/16 at 07:19 PM |
|
|
Welcome I'm not to far from u if you ever need a second pair of hands
Steve
Veinto 2.0 black top.
Jenevy throttle bodies
Omex ecu
|
|
|
rash12
|
| posted on 18/5/16 at 08:00 PM |
|
|
welcome to the forum i have a mx5 based car your welcome to a ride if you want and good luck with your build
|
|
|
Dean m
|
| posted on 18/5/16 at 08:38 PM |
|
|
Thank you for the replies and welcome messages.
I will make sure I put up plenty of pics as I progress, I do have lots more of stripping the eunos down but didn't want to bore you with a load
of pics of a slowly dismantled eunos!
I will certainly have plenty of questions and I may need a extra pair of hands or expert eye cast over my build as I go thanks Steve!
|
|
|
Dean m
|
| posted on 18/5/16 at 08:40 PM |
|
|
quote:
Originally posted by rash12
welcome to the forum i have a mx5 based car your welcome to a ride if you want and good luck with your build
Would love to have a look at your car and a ride would be fantastic, what part of the country are you in?
|
|
|
Ben_Copeland
|
| posted on 19/5/16 at 05:30 AM |
|
|
Welcome to the Haynes Clan 
Give us a shout if you need any advice.
[Edited on 19/5/16 by Ben_Copeland]
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
Luego.2.0
|
| posted on 19/5/16 at 07:25 AM |
|
|
Your welcome to come out in mine anytime. My luego is slightly larger than a mk with a black top zetec and jenevy throttle bodies. I also have a
friend who strips mx5s if you need anything.
Veinto 2.0 black top.
Jenevy throttle bodies
Omex ecu
|
|
|
rash12
|
| posted on 19/5/16 at 03:22 PM |
|
|
Would love to have a look at your car and a ride would be fantastic, what part of the country are you in?
scunthorpe north lincs if you are ever passing give me a shout
|
|
|
Dean m
|
| posted on 19/5/16 at 07:56 PM |
|
|
Thanks everyone,
Lovely car Ben, it looks really aggressive! The roll cage would be exactly how I want mine ( looks similar to the mk Indy cage)
Luego would love a ride and look at your car. Where snouts are you?
|
|
|
Luego.2.0
|
| posted on 19/5/16 at 08:52 PM |
|
|
quote:
Originally posted by Dean m
Thanks everyone,
Lovely car Ben, it looks really aggressive! The roll cage would be exactly how I want mine ( looks similar to the mk Indy cage)
Luego would love a ride and look at your car. Where snouts are you?
The other side of corby my kids go school in Uppingham
Veinto 2.0 black top.
Jenevy throttle bodies
Omex ecu
|
|
|
