AlanH
|
| posted on 7/2/16 at 09:43 AM |
|
|
Speedo magnets.
Is Araldite the best way to bond the speedo magnets to the propshadt?
|
|
|
|
|
ian locostzx9rc2
|
| posted on 7/2/16 at 11:18 AM |
|
|
Yes that worked for me .
|
|
|
Slater
|
| posted on 7/2/16 at 12:00 PM |
|
|
worked for me too, roughen up both surfaces with emery cloth, so nice bare metal and glue 'em on.
still there after 7 years.
Why do they call Port Harcourt "The Garden City"?...... Becauase they can't spell Stramash.
|
|
|
LBMEFM
|
| posted on 7/2/16 at 12:45 PM |
|
|
As above, but for extra security I wrapped them in gaffer tape and thin cable ties. OK over the top but they have never come adrift and they work
perfectly.
[Edited on 7/2/16 by LBMEFM]
|
|
|
SJ
|
| posted on 7/2/16 at 02:30 PM |
|
|
I used Aralidite on its own and it failed. I later combined araldite with a big tie wrap with the head of the tie at the other side of the prop to
give a bit of balance.
That was years ago and I've had no problems.
|
|
|
twybrow
|
| posted on 7/2/16 at 02:36 PM |
|
|
I used epoxy metal, built up around and over each magnet. Has been bombproof.
|
|
|
