neilp1
|
| posted on 23/9/11 at 10:53 AM |
|
|
Duratec starter motor
Is the 2lt mondeo and the fiesta st starter motors the same?
|
|
|
|
|
pjay
|
| posted on 23/9/11 at 12:01 PM |
|
|
Neil - My understanding is the answer is no they aren't the same because of different flywheels. Whether the difference matters I guess depends
on what flywheel you're wanting to use (have to say my knowledge of the ST starter itself is zero).
|
|
|
neilp1
|
| posted on 23/9/11 at 02:32 PM |
|
|
There is one I'm watching on ebay and it says for st fiesta also fits mondeo 2001-2008. My understanding was that they were different
aswell!!
I'm using an st flywheel so need a st starter.
|
|
|
beaver34
|
| posted on 23/9/11 at 04:15 PM |
|
|
just checked, both differnt part numbers
|
|
|
flak monkey
|
| posted on 23/9/11 at 06:37 PM |
|
|
ST flywheel is smaller so the starter sits closer to crank centreline by about 3mm radially.
Mondeo starter wont engage properly if you use a ST flywheel
Sera
http://www.motosera.com
|
|
|
keithjardine
|
| posted on 23/9/11 at 07:22 PM |
|
|
Sorry to hijack, if i was using a flywheel from burtons or rwd then a standard duratec mondeo starter would work fine? I've got an automatic
engine lined up but don't think the starter will be any good from it, can anyone confirm please?
|
|
|
se7ensport
|
| posted on 25/9/11 at 06:58 PM |
|
|
I have a turbosport flywheel, they supply stock to burtons, it lines up with the standard focus starter motor. Can't comment on an auto starter
though as the flywheel might be different.
quote:
Originally posted by keithjardine
Sorry to hijack, if i was using a flywheel from burtons or rwd then a standard duratec mondeo starter would work fine? I've got an automatic
engine lined up but don't think the starter will be any good from it, can anyone confirm please?
|
|
|
