Brackers
|
posted on 26/8/13 at 07:12 PM |
|
|
MK Indy windscreen
Hi all anyone know of an indy screen for sale anywhere? MK say they having prob with supplier. I am considering GBS, anyone know if they fit well with
Indy? Cheers
|
|
|
YQUSTA
|
posted on 26/8/13 at 07:28 PM |
|
|
GBS used to supply MK, I bought mine direct from them I believe its the Zero screen you want.
"If in doubt flat out"
Colin McRae
|
|
Bluemoon
|
posted on 27/8/13 at 09:53 AM |
|
|
Others will fit I have a Westfield one on mine (fail to remember if narrow or wide-bodied), not perfect but looks o.k, MK one is higher.. O.k on mine
as I have Caterham seats and these are at quite a rake angle, so this is not an issue for me.
With home-made weather gear (apologies for photo quality!)
Dan
[Edited on 27/8/13 by Bluemoon]
[Edited on 27/8/13 by Bluemoon]
|
|
whitestu
|
posted on 27/8/13 at 10:54 AM |
|
|
I have Caterham screen on mine an it fits really well.
Stu
|
|
Not Anumber
|
posted on 27/8/13 at 11:27 AM |
|
|
I put a GBS Zero screen on mine and it fits a treat.
In my case I fitted the screen further back on the scuttle than standard but only did this because I was fitting the Zero weather gear at the same
time (The Indy cockpit is slightly longer than on the Zero but fits fine if the screen is mounted an inch or so further back). Again it gave a good
result and the wipers fit nicely through the vertical 'step' on the Indy scuttle where the screen would normally be mounted, looks as
though it was made to fit that way.
|
|
Brackers
|
posted on 27/8/13 at 06:34 PM |
|
|
Cheers guys, also want to fit side screens (doors) assume should still fit ok? Can get these from GBS too? After a black frame!
|
|
Not Anumber
|
posted on 28/8/13 at 09:01 AM |
|
|
If you are fitting the GBS doors and/ or hood to an Indy you will need to mount the base of the screen further back.
Ive posted some pictures on my photo archive. PM me with your email address if you need me to take some more.
|
|
Brackers
|
posted on 28/8/13 at 07:24 PM |
|
|
Thanks
|
|