dan8400
|
| posted on 27/1/16 at 01:43 PM |
|
|
Help with measurements please
Hi everyone.
I wondered if anyone can help with either some measurements or pictures of the Haynes roadster.
All I need are some photos and / or measurements of the rear suspension mounting points and the area around the diff. Don't really want the
whole book as its for a different project. The book is £53 on eBay. So not fussed about buying it for that
Please let me know if anyone can help
Thanks
Dan
Hey - That's Journey!!!
|
|
|
|
|
nick205
|
| posted on 27/1/16 at 02:06 PM |
|
|
You may already have done so, but might be worth joining the Haynes Roadster forum and asking there as well.
|
|
|
dan8400
|
| posted on 27/1/16 at 02:08 PM |
|
|
I haven't but thanks for the pointer
Thanks
Dan
Hey - That's Journey!!!
|
|
|
Slimy38
|
| posted on 27/1/16 at 02:19 PM |
|
|
There is a picture on the Haynes forum of the back end, because I quietly poached it for my blog!!
http://slimyroadster.blogspot.co.uk/2014/07/measuring-up-lower-wishbones.html
It's only a rear view though, but since the rear suspension 'should' only move in one plane the front to back dimensions are less
critical.
|
|
|
dan8400
|
| posted on 27/1/16 at 02:35 PM |
|
|
Thanks slimy
Hey - That's Journey!!!
|
|
|
hizzi
|
| posted on 27/1/16 at 05:17 PM |
|
|
the book is only £20 new? plus what are you building, the haynes book is different from the saturn plans which are different from talons chassis.
are you using sierra or mx5 rear end?
|
|
|
dan8400
|
| posted on 27/1/16 at 05:21 PM |
|
|
Hi Hizzi
I'm building a mid engined single seater based on a chassis I picked up that was for a Rayvolution Reverse trike. I am adding a Passat engine
and gearbox, my own back end and hoped to use Haynes suspension to save me a job of designing a rear from scratch
Not fussed either mx5 or Sierra
Thanks
Dan
Hey - That's Journey!!!
|
|
|
Talon Motorsport
|
| posted on 27/1/16 at 05:28 PM |
|
|
Sounds an interesting project, if the chassis is made of 25mm box it was probably made by me about 4 years ago.
You can download the book for free by the way.
[Edited on 27/1/16 by Talon Motorsport]
|
|
|
dan8400
|
| posted on 27/1/16 at 06:00 PM |
|
|
Hi Talon
I bought two chassis off eBay together. One in round tube (which I sold on) and a 25mm square tube one (which I kept).
Where can I download the book please. I had a google but couldn't find it. Any chance of a link please?
Thanks
Dan
Hey - That's Journey!!!
|
|
|
