Board logo

any idea on size of nut for rear camber adjustment
aka Keith - 15/9/12 at 07:48 AM

Gents, looking to adjust the rear camber on my MK. any idea as to the sze of the nut at the back, the largest spannner I have is 26mm and it will not fit. before I head of to the shops to by spanner of every size, any idea on the sie of the nut to adjust the camber on the back.

Cheers
Craig

Myke 2463 - 15/9/12 at 09:10 AM

educated guess 30mm, measure across flats for size.

mad4x4 - 15/9/12 at 02:23 PM

quote:
Originally posted by Myke 2463
educated guess 30mm, measure across flats for size.


+1 I think form memory

[Edited on 15/909/12 by mad4x4]

renetom - 15/9/12 at 04:20 PM

Hi
As previously stated measure across flats.
We had to fit double locknuts for the IVA.
Good luck
René

http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=Double%20lock.jpg

Custardpants - 11/10/12 at 08:55 PM

Double locknuts tightened and marked with tipex are a good idea. Mine came loose at bedford just as I came into the pits(!)

40inches - 12/10/12 at 07:23 AM

I have a stack of M20 Nyloc nuts, they came in a pack of 25, I only needed 2 for the MK
U2U me and I will pop a couple in the post.
This goes for anyone else who wants them.

[Edited on 12-10-12 by 40inches]

Bluemoon - 12/10/12 at 09:42 AM

As above make sure you have some form of locking, managed to wire lock mine..

Dan