Board logo

Clear tubes
liam.mccaffrey - 3/1/10 at 10:19 PM

I am looking for some clear tubes. Either glass or plastic/lexan/perspex etc. with an approx 3" bore. preferably longer than 2'. Need to be stout as they will be holding a slight vacuum.

Needs to be cheap. I have been looking at spaghetti jars but haven't seen any suitable yet. Anyone have any or or know of anything?

Cheers

Liam Mc


RichardK - 3/1/10 at 10:27 PM

Any good after a quick google LINKY

£30 for 5m but they may have off cuts etc...
Cheers

Rich

[Edited on 3/1/10 by RichardK]


Mansfield - 3/1/10 at 10:37 PM

This guy is good, I have bought from him and would recommend him.

Clearplasticsupplies


designer - 4/1/10 at 12:04 AM

Have a look in a cheap shop. Might get a plastic glass/vase with parallel sides.


liam.mccaffrey - 4/1/10 at 12:31 AM

thanks guys brilliant.

I ahve been looking in poundsaver/poundland etc for a long spaghetti jar but found nothing yet.


Bluemoon - 4/1/10 at 12:17 PM

Just a warning, might be worth covering tube bottle with clear sticky back plastic in-case it implodes under vacuum (stickyback plastic should stop bits flying should the worst happen)..

Dan


trextr7monkey - 4/1/10 at 02:40 PM

Got a couple of lengths of perspex tube about 40 mm external diameter and 1000mm long


liam.mccaffrey - 4/1/10 at 10:21 PM

Thanks for the tips fellas. I have what I need now

I will be testing at least 1 to destruction so will have some idea of it limits.


stevegough - 5/1/10 at 09:18 AM

I see nobody asked what you want them for?


Go, on then! I, for one, am curious!