After thinking about a better rad and fan in my car dude to poor cooling,
I notice the polo rad keeps coming up as its a cheaper option but obviously needs some mods to fit .so heres a few questions
which one do you have?
how did you mount it ?
how is your fan mounted ?
how do you fill it up?
more info and/or pics the better
Which one do you have? Common one is 1.1 Polo, which is 380w x 320 tall. It has 2x 32mm in/outlets on the left, and i beleive one 8mm bleed hose
connection.
http://www.ebay.co.uk/itm/VOLKSWAGEN-POLO-1983-1990-DERBY-SEAT-TERRA-KIT-CAR-RADIATOR-NEW-2-YEAR-WARRANTY-/281080612617
I went for this one which is slightly wider and doesnt have the 8mm bleed hose connection.
http://www.ebay.co.uk/itm/VOLKSWAGEN-GOLF-1-4-1-6-1991-1998-VENTO-MANUAL-RADIATOR-NEW-2-YEAR-WARRANTY-/290891361243
How did you mount it ? I made up some alloy brackets: http://www.loggyboy.com/images/Raw/Radiator/RadiatorBracketsSide.jpg
How is your fan mounted ? It will be mounted with push through plastic clips:
http://www.ebay.co.uk/itm/UNIVERSAL-ELECTRIC-RADIATOR-FAN-FITTING-KIT-NISSAN-200SX-S13-S14-S14a-S15-SILVIA-/220908855852
How do you fill it up? You need a header tank set up.
quote:
Originally posted by maccavvy
After thinking about a better rad and fan in my car dude to poor cooling,
I notice the polo rad keeps coming up as its a cheaper option but obviously needs some mods to fit .so heres a few questions
which one do you have?
how did you mount it ?
how is your fan mounted ?
how do you fill it up?
more info and/or pics the better
Hi
We fitted a polo Rad purchased from Boston radiators £35 + £ 10 P&P, polo 1 ltr 83-90
we made our own aly Z shaped brackets & the polo fan (ebay 95p +P&P)
with steel strips in between the aly brkts.
we cut off the small outlet at the top of rad & araldited a self tapping screw
in the hole, (not required)
The pict of the fan is bent the pict was taken following an accident,
it was just to show how it was fitted.
our layout is for a bike engine but should work equally well on a cec
Waterworks R1 Indy
Rad&fan
good luck.
René
[Edited on 15/7/13 by renetom]
I used a seat Leon radiator which is a bit bigger than a polo one and has slightly thicker core.
It fits very snugly under the nose cone mounted at an angle on home made brackets
[img]
Sierra Front end
[/img]
There's 3 entries in my build diary about the radiator and bracket. Polo rad mounted to bracket I made out of 25x4mm steel . 5mm holes on back of
rad tapped to take M6 fixings to mount to bracket. Same on the front to mount the fan. I have an expansion tank on the bulkhead where the system is
filled from.
Click for build diary
Not finished the car so not sure how well it cools yet!
[Edited on 15/7/13 by Sloan85]
some good ideas and pics on there. cheers guys.
keep em coming though.
ive got a robin hood 2b so space is a bit fiddly inside the frame but im sure I can knock something up.
quote:
Originally posted by loggyboy
Which one do you have? Common one is 1.1 Polo, which is 380w x 320 tall. It has 2x 32mm in/outlets on the left, and i beleive one 8mm bleed hose connection.
VOLKSWAGEN POLO 1983-1990/DERBY/SEAT TERRA/KIT CAR RADIATOR NEW-2 YEAR WARRANTY![]()
I went for this one which is slightly wider and doesnt have the 8mm bleed hose connection.
BRAND NEW RADIATOR VW GOLF MK3 1.4/1.6 PETROL 1991 TO 1998 / VENTO 1992 TO 1997![]()
How did you mount it ? I made up some alloy brackets: http://www.loggyboy.com/images/Raw/Radiator/RadiatorBracketsSide.jpg
How is your fan mounted ? It will be mounted with push through plastic clips:
200 CELL SPORTS CAT STAINLESS STEEL EXHAUST DOWNPIPE FOR RANGE ROVER 4.4 TD V8![]()
How do you fill it up? You need a header tank set up.