tegwin
|
| posted on 27/1/09 at 07:01 PM |
|
|
Can anyone turn this for me?
I need to make a new steering shaft bush out of Nylon/delrin type stuff as mine is so floppy...
Can anyone turn this for me out of a suitable material? Cash/magic beans or weed available
 
[Edited on 27/1/09 by tegwin]
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
|
|
mcerd1
|
| posted on 27/1/09 at 07:11 PM |
|
|
whats the OD of the flange ?
|
|
|
oliwb
|
| posted on 27/1/09 at 07:12 PM |
|
|
I could if mcerd1 isn't able to sort you out....Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
owelly
|
| posted on 27/1/09 at 07:26 PM |
|
|
C'mon!! Lets have some tolerances!! I recon +/- 0.025mm should do it!
http://www.ppcmag.co.uk
|
|
|
mcerd1
|
| posted on 27/1/09 at 08:08 PM |
|
|
quote:
Originally posted by oliwb
I could if mcerd1 isn't able to sort you out....Oli.
I don't think I've got much stuff that size 
I know I've got 16mm PTFE and upto 2" alloy but after that its a bit hit or miss
|
|
|
rf900rush
|
| posted on 27/1/09 at 08:14 PM |
|
|
Is 90deg. enough.
I have some 25mm black nylon how quick do you need it.
Martin
[Edited on 27/1/09 by rf900rush]
|
|
|
tegwin
|
| posted on 29/1/09 at 09:12 AM |
|
|
The OD of the flange is 26mm
It would be good to have it in the next week as its the only thing stopping me getting the car on its wheels
What would the best material be? given that it will be subject to friction from a metal part...
|
|
|
PAULD
|
| posted on 29/1/09 at 09:40 AM |
|
|
turned bit
E-mail me the bore tolerance(+0 +.05?) and the 20 mm tolerance (+0 -.05?) and your address and I'll do it for you. Should get it in the post
Friday ( tomorrow).
|
|
|
