scootz
|
posted on 26/8/11 at 02:04 PM |
|
|
How Many Magnets for Prop Mounted Speed Sensor?
Is there a 'usual number' for prop mounted speed-sensor magnets?
Also, how important is their spacing?
Cheers!
It's Evolution Baby!
|
|
|
Davedew
|
posted on 26/8/11 at 02:08 PM |
|
|
My Acewell uses 1 magnet, but I think you can adjust it upto 4 if needed in the settings.
|
|
whitestu
|
posted on 26/8/11 at 02:27 PM |
|
|
One on mine as well.
Seems to work fine.
Stu
|
|
snapper
|
posted on 26/8/11 at 04:09 PM |
|
|
4 on a Telemetrix
Evenly spaced
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
david_hornet27
|
posted on 26/8/11 at 04:17 PM |
|
|
One on my Acewell and it works great...
|
|
scootz
|
posted on 26/8/11 at 04:51 PM |
|
|
Cheers guys... it's an Acewell sensor that I'm using for a VDO speedo, so I guess I'll start with one and see how I get on!
It's Evolution Baby!
|
|
russbost
|
posted on 26/8/11 at 06:20 PM |
|
|
You will only need one, even on a driveshaft one will give accurate readings from about 2-3 MPH & the prop is going to be going 3 & a bit
times as fast!
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
RickRick
|
posted on 26/8/11 at 07:08 PM |
|
|
i started out with all 4 fitted to the prop, down to just one now, so top tips for making them stay put welcome. but apart from having to reset the
speedo i can't tell the difference in the readout
|
|
phelpsa
|
posted on 26/8/11 at 07:14 PM |
|
|
quote: Originally posted by RickRick
i started out with all 4 fitted to the prop, down to just one now, so top tips for making them stay put welcome. but apart from having to reset the
speedo i can't tell the difference in the readout
Chemical metal!
|
|
stevegough
|
posted on 26/8/11 at 08:16 PM |
|
|
quote: Originally posted by RickRick
i started out with all 4 fitted to the prop, down to just one now, so top tips for making them stay put welcome. but apart from having to reset the
speedo i can't tell the difference in the readout
I have got two, and they are fixed in place with a 'two - pack' type gunge which is, I suppose a sort of chemical metal like phelpsa
mentioned - its called...... Unibond repair express power putty ....and I got it from B+Q at peel corner, but I think the holyoake ave branch is
nearer you?
pic....
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|