yellowcab
|
| posted on 13/4/13 at 05:52 PM |
|
|
Making braided brake lines... Where to buy fittings?
So I've bought the JIC -3 PTFE lined braided brake hose itself.
I now need:
-3 to 1/8 bsp female (straight) x2 - Wilwood caliper fronts
-3 to 1/8 bsp male (straight) x4 - inboard 2 fronts and 2 rears
-3 to banjo (straight) x2 - to go to rear Sierra calipers
1/8 bsp banjo bolts x2 - to go through above banjos into Sierra calipers at rear
Where is the best place to get what I need from?
|
|
|
|
|
MsD
|
| posted on 13/4/13 at 06:04 PM |
|
|
I got all mine from Rally Design. I recall that they had a wide range of fittings!
Mark.
|
|
|
J222jra
|
| posted on 13/4/13 at 06:13 PM |
|
|
Torques on ebay are very good aswell to be honest. Ive used them before for oil lines, brake lines and fuel lines.
|
|
|
blakep82
|
| posted on 13/4/13 at 06:22 PM |
|
|
I got a load from rally design, phone them to order though, rather than do it online, postage should be a lot cheaper.
However, contact russbost on here, get some made up, properly swaged, not screwed together. Top value too
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
40inches
|
| posted on 13/4/13 at 06:52 PM |
|
|
Try russbost.
|
|
|
yellowcab
|
| posted on 13/4/13 at 06:58 PM |
|
|
Thanks chaps, will u2u russbost now
|
|
|
maccavvy
|
| posted on 13/4/13 at 07:04 PM |
|
|
I recently got mine all made up from hose technik..top quality and top service.
Understeer , when the front hits a wall
Oversteer, when the back hits a wall
Horsepower ,how fast you hit the wall
Torque ,how far you take the wall with you
|
|
|
sdh2903
|
| posted on 13/4/13 at 07:28 PM |
|
|
Another vote for russbost, Ordered a set, the next day they were on the car, job done, His prices mean its not worth bothering trying to make your
own.
|
|
|
rdodger
|
| posted on 13/4/13 at 07:30 PM |
|
|
quote:
Originally posted by sdh2903
Another vote for russbost, Ordered a set, the next day they were on the car, job done, His prices mean its not worth bothering trying to make your
own.
+1
Stainless fittings from Russ too!
|
|
|
otodb
|
| posted on 13/4/13 at 07:32 PM |
|
|
Another + for Russ
|
|
|
yellowcab
|
| posted on 13/4/13 at 07:33 PM |
|
|
Cool beans chaps, I've sent him a message... Just one of the reasons I love this forum!
|
|
|
40inches
|
| posted on 13/4/13 at 07:34 PM |
|
|
quote:
Originally posted by rdodger
quote:
Originally posted by sdh2903
Another vote for russbost, Ordered a set, the next day they were on the car, job done, His prices mean its not worth bothering trying to make your
own.
+1
Stainless fittings from Russ too!
Top quality, fast delivery and good price. What more could you ask?
|
|
|
jimmyd
|
| posted on 13/4/13 at 07:38 PM |
|
|
Don't want to be harp on but ...... Yet another vote for Russ
|
|
|
T66
|
| posted on 13/4/13 at 09:11 PM |
|
|
And when I eventually get to the brakes jobs - RussBost.....
|
|
|
Fatgadget
|
| posted on 14/4/13 at 01:06 AM |
|
|
Think Automotive. http://www.thinkauto.com/
|
|
|
RichardK
|
| posted on 14/4/13 at 05:19 AM |
|
|
Russbost every time mate
Gallery updated 11/01/2011
|
|
|
