Charlie C
|
posted on 18/6/18 at 09:47 AM |
|
|
Oil pressure sender question
Hi
I have a electrical oil pressure gauge and a seperate an oil pressure warning light on my Acewell digidash, can I run both of these from one oil
pressure sender. Currently I have these on individual senders, but I want to make room for a oil temp sensor without having multiple tee pieces.
Thanks
Charlie
|
|
|
gremlin1234
|
posted on 18/6/18 at 11:42 AM |
|
|
you can get combined pressure sender and switch
eg: this 'esps' unit
http://www.enovationcontrols.eu/products/electric_gauge/electric_gauge_sensors_esps_ests.htm
http://www.enovationcontrols.eu/pdf/ys6490.pdf
|
|
Charlie C
|
posted on 18/6/18 at 12:24 PM |
|
|
Thats great thanks, I'm have problems finding some where to buy one from.
|
|
ian locostzx9rc2
|
posted on 18/6/18 at 01:49 PM |
|
|
Etb instruments do a combined one give them a ring for the spec
|
|
rodgling
|
posted on 18/6/18 at 07:57 PM |
|
|
Other option is to mount one of the sensors somewhere else. The temperature sensor can go into the sump easily enough - either drill and tap or simply
replace the drain plug.
|
|