hellbent345
|
posted on 25/9/08 at 09:29 AM |
|
|
alloy upright manufacturers
who are the manufacturers that produce alloy uprights, both racing and cortina geometry? i know of raceleda but cant remeber the other/s
|
|
|
minitici
|
posted on 25/9/08 at 09:59 AM |
|
|
Westfield make nice alloy front & rear uprights.
|
|
Duncan_P
|
posted on 25/9/08 at 10:07 AM |
|
|
Rally Design also sell some, although they may just be reselling someone elses.
[Edited on 25/9/08 by Duncan_P]
|
|
Custardtart
|
posted on 25/9/08 at 10:07 AM |
|
|
I believe Raceleda don't exist anymore, I think they were bought by MNR but there have been a number of failures reported on their alloy front
uprights which you may want to check out before going that route.
The Westfield ones look very good but are expensive and only slightly lighter than the Cortina ones although some people say they address the ackerman
issue of the Cortina's and others say the opposite - don't you just love opinions
They're only noodles
|
|
hellbent345
|
posted on 25/9/08 at 10:19 AM |
|
|
thanks chaps, any other manufacturers that do race uprights?
|
|
Hammerhead
|
posted on 25/9/08 at 10:19 AM |
|
|
quote: Originally posted by Custardtart
I - don't you just love opinions
yeah, there just like arseholes, everyone has one but no one wants to hear it. ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif)
|
|
Hammerhead
|
posted on 25/9/08 at 10:20 AM |
|
|
oh and by the way, Lotus elise uprights are alloy, ebay a good source.
|
|
hellbent345
|
posted on 25/9/08 at 10:39 AM |
|
|
cool what is the price of elise uprights normally? how is the geometry of them? good?
if you look at this hub pic, is the square flange at the back for mounting the brake disc to?
edit: whoopsie doodle here be the linky
[Edited on 25/9/08 by hellbent345]
|
|
MikeRJ
|
posted on 25/9/08 at 11:06 AM |
|
|
quote: Originally posted by Hammerhead
quote: Originally posted by Custardtart
I - don't you just love opinions
yeah, there just like arseholes, everyone has one but no one wants to hear it. ![](/images//smilies/bigsmile.gif)
The expression I heard was "Opinions are like arseholes, everyone's got one and most of them stink"
quote: Originally posted by hellbent345
if you look at this hub pic, is the square flange at the back for mounting the brake disc to?
Yes, the flange at the back of the hub is where the brake disc is attached.
|
|
minitici
|
posted on 25/9/08 at 11:24 AM |
|
|
Another supplier of race uprights is Bridge Engineering
Link
AKA MambaMotorsport
Link
|
|
markyb
|
posted on 25/9/08 at 12:57 PM |
|
|
quote: Originally posted by MikeRJ
quote: Originally posted by hellbent345
if you look at this hub pic, is the square flange at the back for mounting the brake disc to?
yup - the brake disc fits to the square flange (well thats how I did mine but the car isnt on its wheels yet !!!)
[Edited on 25/9/08 by markyb]
|
|
hellbent345
|
posted on 25/9/08 at 10:03 PM |
|
|
thank you all kindly ![](/images//smilies/smile.gif)
|
|