been reading through some old posts, but i just want to make extra sure before a start drilling holes etc, should the scuttlle line up flush with the bar running across? as show in the photo?
Rescued attachment DSCF1910.JPG

Do you have MK's Battery Tray Piece?

Steve

I think the best way to line up the scuttle is with the change in direction on the side panel once it is fitted.

Steven.

I gaffer taped the nose cone and bonnet on to make sure it all fitted properly

Turned out to be a good move as it was a bugger to get it all lined up properly.

Deffo work back from the nosecone/bonnet and have the side panels temporarily fitted in place

quote:

---

I think the best way to line up the scuttle is with the change in direction on the side panel once it is fitted.

---

quote:

---

Originally posted by Kev99

quote:

---

I think the best way to line up the scuttle is with the change in direction on the side panel once it is fitted.

---

I did mine this way as well

---

quote:

---

Originally posted by Hellfire

quote:

---

Originally posted by Kev99

quote:

---

I think the best way to line up the scuttle is with the change in direction on the side panel once it is fitted.

---

I did mine this way as well

---

So did we. Third vote here.

Phil

---