I see from the various builds on here that some of you guys have been using the electric starter motor route. I am currently using a reverse box on my own Busa but like the idea of freeing up the potential extra ponies that are apparently lost through the drivetrain. Having looked at some of the pics on here I could certainly carry out the work except, I would need to buy the ring gear from someone. Has anyone on here got a contact for this or can some of the really well sorted engineers supply one.
I'd be interested in this to!
Interested too as I think £350 for the MK is a lot. Although its cheaper than a quaife. So I will buy if I have to.
could you just buy the ring to go on the diff from MK?
Road Runner Racing might be able to help. They have been a chain diff reverse system with ring gear. Speak to Kev about having a ring gear cut
Description
Dave
Try AB Performance, Im sure they make one.
I am looking at this at the moment. Guy in our QC can work out the teeth pattern required from the starter motor gear. He recommended these guys
http://www.hpcgears.com/products/spur_gears.htm
He spoke to the guy there and with some basic measurements they will work out what MOD you need etc. They can make ring gear in various sizes and this
is who I intend to use.
Does anyone know if Bosch starters all use the same ring gear? I am off to the scrappy at some point to dig one out.
Rich
I had a spur gear with module 2.5 cut for my rover starter motor. It meshes perfectly even though the rover pinion doesn't seem to eactly follow
any of the spur gear calcs I've seen. Maybe its because it has been designed to have a loose mesh so it will engage more easily. Another rover
starter motor seemed to have a module of 2.3 and definately would not mesh with my 2.0 or 2.5 spur gear I have had cut
Dave
HPC for gears, I,m looking at Nissan Micro starter at mo. Small and cheap on fleabay
does anyone have a picture of the mk set up they can put up on here. looks like we could get the ring gear sorted and theres a guy near me who recons starter motors. i went in there a few months ago with a bmw525 starter motor covered in 15 years of oil and c£$p. the first words out of his mouth were 'thats a bmw525 diesel starter motor' i ve got five on the shelf' . so if someone puts a picture of the starter up they use i ll show him a pic and we ll get a price sorted of him! anytakers?
quote:
Originally posted by mad_dogpompey
does anyone have a picture of the mk set up they can put up on here.
Seems like one of the more interesting topics at the moment, all these people interested!
Perhaps if we can identify a small enough starter motor and a willing engineer to turn/manufacture the ring gear we will all be on a winner.
I saw an ad by Turner Tech who have made these in the past , but have not yet managed to speak to them so I have no idea of cost.
try looking for a nissan qashqai starter motor - i was looking at them the other day at work and they are tiny! - dunno about price, fit or availabilty tho..
The MK set-up looks very durable, quite lovely in its simplicity. What I can say is that there is clearly vastly more space under the MK diff flange
pictured than the space under the Westfield/Freeloader.
AB (Mr Bates), does offer a very lightweight ready to adapt system based on a bike starter motor. I have this on the Westfield, I can vouch that the
result is entirely satisfactory too. Remember this is from my perspective, which is from a driver that doesn't need/want to reverse much these
days (circuit use only).
As for horsepower, no, taking out your reverse box doesn't really do a great deal to alter this in my view. The rolling road is telling me
there's no real difference. I wouldn't do the job for that reason.
However, the car has been transformed since I binned the reverse box. Lap times have come down, the noise and vibes have evaporated, the
acceleration/deceleration times have shrunk fantastically. The tunnel isn't dripping with oil. No transmission components have attempted to join
me in the cockpit (yet). Bin the box for these reasons.
It's hard to beat a mechanical reverse on the road though, that's my opinion. When I used the car as a daily driver, it was fantastic, the
ability to reverse effortlessly at any time, for any distance.
I'd be interested in getting one of these - only thing is the working out of the teeth to fit the motor.
In the pictures of the MK system the mounts would be right on top of my fuel / brake lines. Would be a bit easier to install if it was bolted direct
to the chassis members rather than having to weld those mounts on.
Although I have had some noise issues with the westfield transmission tunnel lubrication system, ( reverse box ) my main interest is in applying this
electric system to the car currently in the garage being converted from Xflow to Gsxr. If this can be perfected then perhaps I can convert my Busa and
spend money from the sale of said lubrication system on something nice for the garage. By the way how many beer tokens was Mr AB needing for his
kit?
I know this setup is partially just because we have to have it for IVA (although I am not sure I could cope without a reverse gear) but can anyone
tell me how well it actually works ? Haven;t heard anyone mention how capable it is or how rapidly you move backwards towards the scenery!
Cheers
Rich
The Westfield Tunnel Lubrication System, is noisy. I didn't think it was, after all the sound of a screaming GSXR doesn't allow the brain to
filter out the gear howl. However, it is quieter, and vibe free (which the WTLS wasn't, especially when going into flange and bearing suicide
mode).
I sold both of my WTLS units, though one of them (just rebuilt by the Factory) was oil tight during a quick test - it isn't a myth, I had the
one.
Get in touch with Mr Bates for his beer voucher requirements, he's a friendly chap, though sometimes a bit busy and nomadic. Persevere and
he'll probably be able to help solve your problems.
However, if you're not IVA'ing or MSA'ing, there seems no reason to equip for reverse, seems pointless.
The noise I was refering to was indeed some bearing canibalism and even after rebuild the T L S was quite soon back on top form, at least I know that
the chassis isnt going to suffer from rust.
Both cars I am refering to are road regd and used for track so merely thinking of lecky reverse for handyness and probably quite a bit of just makin
it work.
to give you all a laugh. I have made exectly the drawing above for my chain driven car. It works perfectly........FOWARDS
The starter rotats anticlockwise viewed from the opposite end to the teeth. I thought it was a Honda but not sure. can anyone confirm as I know honda
engines rotate the other way????
H E L P
what about the MNR reverse box..... tests have shown its saps less power than a quaife unit.... 5bhp at the wheels on an R1 engined car.
See here
for a picture I took during my visit to MK