Board logo

SVA Leighton Tommorow!!!!!
IDONTBELEIVEIT - 9/3/09 at 11:37 AM

Hi Guys,a few last minute checks today before the big day,just wondered if you can spot any problem areas TIA
wayne Rescued attachment SVA.jpg
Rescued attachment SVA.jpg


IDONTBELEIVEIT - 9/3/09 at 11:37 AM

SVA 1 Rescued attachment SVA 1.jpg
Rescued attachment SVA 1.jpg


IDONTBELEIVEIT - 9/3/09 at 11:38 AM

SVA 2 Rescued attachment SVA 2.jpg
Rescued attachment SVA 2.jpg


IDONTBELEIVEIT - 9/3/09 at 11:38 AM

SVA 3 Rescued attachment SVA 3.jpg
Rescued attachment SVA 3.jpg


IDONTBELEIVEIT - 9/3/09 at 11:39 AM

SVA 4 Rescued attachment SVA 4.jpg
Rescued attachment SVA 4.jpg


IDONTBELEIVEIT - 9/3/09 at 11:39 AM

SVA 5 Rescued attachment SVA 5.jpg
Rescued attachment SVA 5.jpg


IDONTBELEIVEIT - 9/3/09 at 11:41 AM

SVA 6 Rescued attachment SVA 6.jpg
Rescued attachment SVA 6.jpg


cloudy - 9/3/09 at 11:41 AM

Bottom shock seats need covering, that's all I can spot maybe some issues with the headlight mounts


Looks awesome by the way - love the tyre art

[Edited on 9/3/09 by cloudy]


02GF74 - 9/3/09 at 11:46 AM

Bloody hell - your dog's been busy!?!?!?!


- both hoses to fuel filter marked?
- think you need covering over the braided brake hoses
- indicators not too far in?
- is radius on the sterring arms where the track rods fit ok?

[Edited on 9/3/09 by 02GF74]


IDONTBELEIVEIT - 9/3/09 at 11:58 AM

bottom shock seats?,what do you mean the bottom wishbone suspension brkt,cover with u-trim?
what do you think is up with the headlamp brkts
braided hoses have a clear plastic coating
cheers wayne


cloudy - 9/3/09 at 12:01 PM

No the large nut that takes a C spanner to adjust the seat platform on the threaded part of the shock

James


Dangle_kt - 9/3/09 at 12:07 PM

Don't the seat belt ancorage points need u trim round them? not the bolt, but the bit that snaps onto the bolts that the harness straps pass through.

Also will the seats be considered as part of the harness system due to the belts stretching round the sides? Its hard to tell without a picture of you in the car with the harness on. If so then the seats need harness holes in unfortunatly


Looks v tidy though.

[Edited on 9/3/09 by Dangle_kt]


IDONTBELEIVEIT - 9/3/09 at 12:12 PM

what did you do with your shock seats james,have to look into the seat/harness issue,do you guys know how fast the tester will go to check self centering
wayne


cloudy - 9/3/09 at 12:13 PM

I used 1:10 scale RC car tyres inside out top and bottom, Doug commented they did the job well

Test for self centering isn't fast 10-20mph i'd say

Good luck with the test, i'm there wednesday for my retest...

James


tiger7 - 9/3/09 at 12:55 PM

You should give the dog a bone...


IDONTBELEIVEIT - 9/3/09 at 02:04 PM

cheers james for the old RC car tyre trick LOL Rescued attachment SVA 8.jpg
Rescued attachment SVA 8.jpg


IDONTBELEIVEIT - 9/3/09 at 06:57 PM

bit late in the day,but has anybody got any other opinions on dangle_kt's comment about seats and harness
cheers wayne


cloudy - 9/3/09 at 07:00 PM

Looks good, remember to avoid tie wraps unless strictly necessary - they give a temporary air about things...

James


Meeerrrk - 9/3/09 at 11:18 PM

loved you car the first time i saw the pics, the rear is really good.

WOW that dog has dug the BIGGEST hole ever


dogwood - 10/3/09 at 08:30 AM

Caliper bleed nipple cover..?




OOPS....Just realised "Tomorrow" is today...


Well good luck for today...

David

[Edited on 10/3/09 by dogwood]


adithorp - 10/3/09 at 04:47 PM

Nice one!

Just thought I'd get in first.

adrian