919 blade clocks.

After a set of clocks for a 919 blade engine. Don’t know much about motor bike engines and there seem to be a few variations. So any advice welcome.

Paul

Make sure you get the bit of harness to go with them !

I got some 919 all in one clocks, pig to attach wires to the little pins but they work well.


Rescued attachment clocks_hall.JPG

9 boltheads on the prop gets you very close to correct speed on the mph clock with 3.65 diff and 185/60/13 tyres, this was just using a scrap ABS sensor from the sierra.

I cut a hole to recess the clocks in my panel, I could/should have split them (they screw together) then cut a hole smaller and sandwiched the ali dash panel.

Regards Mark