Loved it when the comeback was "you guys are jealous"!
Anyone seen this gem of a thread before...?
http://www.lancerregister.com//showthread.php?t=224101
Whats with the filed out lines?
This has ruined me evening! I'm going to have to read the whole lot now, I'm addicted!
I love this kind of craftsmanship
ummmm blue pedals
The post is a big one so keep looking, some of the work is really shoddy.
The ground out lines in the combustion chambers are to enhance the mixtures path to the sparkplugs...
yeah right
Between about page 7 and 12 theres not much, but the images come in thick and fast after that.
Horrific
Check out the homemade clutch on page 21
looks really safe
my dad:
for all the mickey taking and ridiculous stuff he's done, the engine actually runs so he at least hes assembled it properly
quote:
Originally posted by T66
Check out the homemade clutch on page 21
looks really safe
To tackle removing a complete dash from an EVO, and refitting it requires some skill without doubt...
His engineering prowess is lacking though, his paintwork is horrendous.
Hahaha page 64 (though the 'work' isn't from the main subject of the thread)
New avatar thank you very much!
lol notice all his youtube vids have had comments disabled
Thats quite 'special'
I couldn't believe that someone would take an angle grinder to a clutch and then photo it as an example of their great work
Loved it when the comeback was "you guys are jealous"!
fair play for having a go, but you have to admit to yourself that when your rubbish at something, there's no point in trying! but having said
that, that thread has to be one of the funniest threads i've read in a long while,
"step away from the TIG Welder!" Class!
quote:
Originally posted by omega0684
fair play for having a go, but you have to admit to yourself that when your rubbish at something, there's no point in trying! but having said that, that thread has to be one of the funniest threads i've read in a long while,
"step away from the TIG Welder!"
quote:
Originally posted by tomprescott
I couldn't believe that someone would take an angle grinder to a clutch and then photo it as an example of their great work
Loved it when the comeback was "you guys are jealous"!
I actually started laughing out loud when I viewed this link!
Then I nearly re-decorated my screen with coffee when I saw the photos on page 64!
Proper priceless stuff!
Page 64 is class, like the turbo mod, sure I've seem some one else try that before...
Welding a work of "art"...
what makes the thread even funnier for me, is the guys are taking the pics from another forum and posting them up to theirs so they can laugh at
them...
priceless
Oh my word, page 64 is amazing I hadnt seen those pics before.
Flabbergasted
what ratio is a evo diff and are they lsd
[Edited on 12-1-10 by mangogrooveworkshop]
The propshaft paint matches the ramp its sitting on ....
I bet the garage doors are the same too.
cringe
Finally seen someone who's welding is worse than mine Mind you there's something almost artistic about that manifold.
[Edited on 13/1/10 by Ivan]
I think the diffs are electronic aren't they? All part of the active yaw control gubbins? I may be wrong, but one item on Ebay says it was removed to fit a non-AYC LSD diff.
Mr Bean paint job!
Place tin of blue paint in middle of car and detonate!
Quality
after all that the engine actually ran and pulled (albeit briefly) 380hp at 7000RPM!
What a testiment to the engine in the first place.
Then the picture of the guy who penned the three marks on his forehead. FANTASTIC!!!
I AM only Jealous
......Neil